Partitions

Style 1

Style 2

Style 3

Style 4

Style 5

Style 6

Style 7

Style 8

Fluted Partition Specifications

Diameter of Content (mm)	Fluting Holds From...To	Length of 10-Flutes Fluted Partition (mm)	Length Center to Center from One Flute to Another (mm)	Height Average (mm)
6.5	5.0 - 6.0	83.6	7.6	9
8	6.8 - 7.7	94.6	8.6	10
9	7.8 - 8.7	105.6	9.6	11
10	8.8 - 9.7	117.7	10.7	12
11	9.8 - 10.7	128.7	11.7	13
11.5	11.3 - 11.5	134.2	12.2	13.5
12	10.8 - 11.7	139.7	12.7	14
12.5	11.3 - 12.2	145.2	13.2	14.5
13	11.8 - 12.7	151.8	13.8	15
14	13.8 - 14	162.8	14.8	17
15	13.8 - 14.7	173.8	15.8	19
16	14.8 - 15.7	187	16.8	20
17	15.8 - 16.7	198	17.6	21
18	16.8 - 17.7	209	19	22
20	18.8 - 19.7	232.1	21.1	24
21	20.5 - 21	243.1	22.1	25
22	20.8 - 21.7	254	23.1	26
23	21.8 - 22.7	263	23.9	27
25	23.8 - 24.7	286	26	29
26	24.8 - 25.7	299.2	27.2	32
28	27.0 - 28.0	321.2	29.2	34
30	28.0 - 29.7	343.2	31.2	36

Explanation of Code

Number	Measurements	Examples
First Number To figure out the style number you must refer to the style sheet.	Style	Style 2
Second Number To figure out the diameter you must measure the length and then divide by the number of flutes +1.	Diameter of Content	10mm. DIA
Third Number To figure out the width of the flute you must measure the width of the flute from tip to tip.	Width of Flute	WF = 50mm
Forth Number To figure out the width of the bottom paper you must measure from side to side.	Width of Bottom	WB = 100mm
Fifth Number To figure out the number of usable flutes you must count the number of flutes.	Number of Usable Flutes	25 Flutes

OVER SHIPMENT

Exact quantities cannot be guaranteed. We reserve the right to over or underrun this custom-made item in the amount of:

10% = of quantity ordered up to 25,000
7½% = of quantity ordered from 25,000 – 50,000
5% = of quantity ordered from 50,000 – 100,000
2% = of quantity ordered over 100,000

TOLERANCES

LENGTH OF A FLUTED PARTITION
Up to 200mm Long Fluted Ptn. = 1mm
Over 200mm Long Fluted Ptn. = 1½mm

HEIGHT OR WIDTH
Up to 200mm Long Fluted Ptn. = ½mm
Over 200mm Long Fluted Ptn. = ½mm